4 C's of a Diamond:

Learning about diamonds is first learning about the "four Cs" of diamonds:

These are the criteria jewelers use when grading diamonds, and they're the ones you'll need to understand to buy the right diamond for you.

Cut:

Diamond cut is perhaps the most important of the four Cs, so it is important to understand how this quality affects the properties and values of a diamond. A good cut gives a diamond its brilliance, which is that brightness that seems to come from the very heart of a diamond. The angles and finish of any diamond are what determine its ability to handle light, which leads to brilliance.

As shown in the images below, when a diamond is well-cut, light enters through the table and travels to the pavilion where it reflects from one side to the other before reflecting back out of the diamond through the table and to the observer's eye. This light is the brilliance we mentioned, and it's this flashing, fiery effect that makes diamonds so mesmerizing.

In a poorly cut diamond, the light that enters through the table reaches the facets and then 'leaks' out from the sides or bottom of the diamond rather than reflecting back to the eye. Less light reflected back to the eye means less brilliance.

Good Proportions are Key
Most gemologists agree that the best cut diamonds are those that follow a set of formulae calculated to maximize brilliance. These formulae can be seen in a diamond's proportions, most importantly how the depth compares to the diameter, and how the diameter of the table compares to the diameter of the diamond.

However, the variance in the proportions between an Ideal Cut and a Poor Cut can be difficult to discern by the casual observer.

Because cut is so important, several grading methods have been developed to help consumers determine the cut of a particular diamond. In general, these grades are:

Which Grade of Cut Should I Buy?     Go To Top
Selecting the grade of cut is really a matter of preference. To make the best selection, you need to understand the various grades. Please note that the descriptions below are general guidelines.

Ideal Cut
This cut is intended to maximize brilliance, and the typically smaller table sizes of these diamonds have the added benefit of creating a great deal of dispersion or 'fire' as well. Ideal quality diamonds are truly for the person who enjoys knowing that he has one of the finest things that money can buy. This category applies only to round diamonds.

Premium
In the case of round diamonds, many Premium Cut diamonds have cuts that are the equal of any Ideal Cut diamond, though they often can be purchased at slightly lower prices than AGS Ideal Cuts. They are intended to provide maximum brilliance and fire. Like the Ideal Cut, these are also for the person who enjoys knowing that he has one of the finest things that money can buy.

Very Good
These diamonds reflect most of the light that enters them, creating a good deal of brilliance. With these diamonds, the cutters have chosen to stray slightly from the preferred diamond proportions in order to create a larger diamond. The result is that these diamonds fall slightly outside of some customers' preferences in terms of, for example, table size or girdle width, though, in many cases many of the parameters of diamonds in this range will overlap with certain parameters of diamonds in the Ideal or Premium ranges. Generally, the price of these diamonds in slightly below that of Premium cuts.

Good
Diamonds that reflect much of the light that enters them. Their proportions fall outside of the preferred range because the cutter has chosen to create the largest possible diamond from the original rough crystal, rather than cutting extra weight off to create a smaller Premium quality diamond. Diamonds in this range offer an excellent cost-savings to customers who want to stay in a budget without sacrificing quality or beauty.

Fair & Poor
A diamond graded as fair or poor reflects only a small proportion of the light that enters it. Typically these diamonds have been cut to maximize the carat weight over most other considerations.

Diamond Anatomy
Wondering what on earth is the diamond's pavillion ? Table? Culet? The graphic and supporting text below explain the various "parts" of a diamond.

Clarity:     Go To Top

When we speak of a diamond's clarity, we are referring to the presence of identifying characteristics on (blemishes) and within (inclusions) the stone.

If you think about the incredible amount of pressure it takes to create a diamond and the fact that natural diamonds are not grown in a sterile laboratory, it's no surprise that most diamonds have flaws.

Basically there are two types of flaws: inclusions and blemishes. Inclusions refer to internal flaws and blemishes refer to surface flaws. However, in the diamond grades listed below, you'll note that none of the grades include the term "blemish" -- for the purposes of grading diamonds, all flaws are called "inclusions."

Inclusions include flaws such as air bubbles, cracks, and non-diamond minerals found in the diamond. Blemishes include scratches, pits, and chips. Some blemishes occur during the cutting processes (most often at the girdle). Diamonds with no or few inclusions and blemishes are more highly valued than those with less clarity because they are rarer.

How are diamonds graded for clarity?
Diamonds are graded for clarity under 10x loupe magnification. Grades range from Flawless (diamonds which are completely free of blemishes and inclusions), to Included 3 (diamonds which possess large, heavy blemishes and inclusions that are visible to the naked eye).

While the presence of these clarity characteristics (inclusions and blemishes) do lower the clarity grade of a diamond, they can also be viewed as proof of a diamond's identity. GIA certificates include what is known as a "plot" of a diamond's inclusions -- think of it as a "diamond fingerprint." Since no two diamonds are exactly the same, comparing the uniqueness of your diamond's clarity characteristics with the plot provided on the diamond certificate offers assurance that the diamond you pay for is the same diamond you receive.

Color:     Go To Top

When jewelers speak of a diamond's color, they are usually referring to the presence or absence of color in white diamonds. Color is a result of the composition of the diamond, and it never changes over time.

Because a colorless diamond, like a clear window, allows more light to pass through it than a colored diamond, colorless diamonds emit more sparkle and fire. The formation process of a diamond ensures that only a few, rare diamonds are truly colorless. Thus the whiter a diamond's color, the greater its value.

[NOTE: Fancy color diamonds do not follow this rule. These diamonds, which are very rare and very expensive, can be any color from blue to green to bright yellow. They are actually more valuable for their color.]

To grade 'whiteness' or colorlessness, most jewelers refer to GIA's professional color scale that begins with the highest rating of D for colorless, and travels down the alphabet to grade stones with traces of very faint or light yellowish or brownish color. The color scale continues all the way to Z.

Which Color Grade Should I Choose?
Diamonds graded D through F are naturally the most valuable and desirable because of their rarity. Such diamonds are a treat for the eyes of anyone. But you can still obtain very attractive diamonds that are graded slightly less than colorless. And diamonds graded G through I show virtually no color that is visible to the untrained eye.

And while a very, very faint hint of yellow will be apparent in diamonds graded J through M, this color can often be minimized by carefully selecting the right jewelry in which to mount your diamond. Keep in mind that, while most people strive to buy the most colorless diamond they can afford, there are many people who actually prefer the warmer glow of lower-color diamonds.

What is Flourescence ?
Fluorescence is an effect that is seen in some gem-quality diamonds when they are exposed to long-wave ultraviolet light (such as the lighting frequently seen in dance clubs). Under most lighting conditions, this fluorescence is not detectable to the eye. While most gemologists prefer diamonds without this effect, some people enjoy it. It's really just a matter of aesthetics.

Carat Weight:     Go To Top

A carat is a unit of measurement, it's the unit used to weigh a diamond. One carat is equal to 200 milligrams, or 0.2 grams.

The word "carat" is taken from the carob seeds that people once used in ancient times to balance scales. So uniform in shape and weight are these little seeds that even today's sophisticated instruments cannot detect more than three one-thousandths of a difference between them.

[NOTE: Don't confuse "carat weight" with "karat," the method of determining the purity of gold.]

The process that forms a diamond happens only in very rare circumstances, and typically the natural materials required are found only in small amounts. That means that larger diamonds are uncovered less often than smaller ones. Thus, large diamonds are rare and have a greater value per carat. For that reason, the price of a diamond rises exponentionaly to its size.